Siemens SIWAREX WL270 CP-S SA Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Siemens SIWAREX WL270 CP-S SA. Siemens SIWAREX WL270 CP-S SA 38 stron. Mounting plates cp-s sa
Również dla Siemens SIWAREX WL270 CP-S SA: Instrukcja obsługi (40 strony)
Drukuj stronę
Introduction
1.1
Purpose of this documentation
These instructions contain all the information you need for commissioning and using the
device.
It is aimed at persons who install the device mechanically and commission it, as well as at
service and maintenance engineers.
1.2
History
The following versions of this documentation have been released to date. The changes apply
to the previous version:
Edition
04/2009
1.3
Scope of delivery
The scope of delivery is made up of the following components:
● Information sheet
● Mounting plate
1.4
Environmental protection
Environmental protection
Devices described in this programming manual can be recycled owing to the low content of
noxious substances in their version. Please contact a certified waste disposal company for
eco-friendly recycling and to dispose of your old devices.
CP-S SA
Operating Instructions, 04/2009, A5E02522341B
Comment / change
Initial release
The delivery unit comprises one mounting plate.
Note
Other scope of delivery information
You need two mounting plates for installing a load cell. Drawings of the mounting plates
can be found in Section Preparing the mounting plates (Page 23)
1
5