Samsung 933HD - SyncMaster Plus - 18.5" LCD Monitor Podręcznik użytkownika - Strona 36
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor Samsung 933HD - SyncMaster Plus - 18.5" LCD Monitor. Samsung 933HD - SyncMaster Plus - 18.5" LCD Monitor 43 stron. Samsung lcd tv monitor user manual
Drukuj stronę
APPENDIX
TV monitor Self-Diagnosis
¦
You can check if the product is working properly using the Self-Diagnosis function.
N
If a blank screen is displayed and the Power LED blinks even if the product and the PC are
N
properly connected, perform the selfdiagnosis function according to the procedures below.
1. Turn the product and the PC off.
2. Remove the D-Sub cable from the product.
3. Turn the product on.
4. If the product is working properly, the <Check Signal Cable> message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC
and the connection.
Troubleshooting
¦
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of
these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG.
Problem
Poor picture.
Poor sound quality.
No picture or sound.
No sound or sound is too low at
maximum volume.
The TV operates erratically.
The TV won't turn on.
Remote control malfunctions.
'Check signal cable' message.
'Not Supported Mode' message.
Digital broadcasting screen
problem.
The image is too light or too dark.
BN59-00905F_eng.indd 34
Possible Solution
Try another channel. / Adjust the antenna. / Check all wire
connections.
Try another channel. / Adjust the antenna.
Try another channel. / Press the SOURCE button.
Make sure the TV is plugged in. / Check the antenna
connections.
First, check the volume of units connected to your TV
(digital broadcasting receiver, DVD, cable broadcasting
receiver, VCR, etc.). Then, adjust the TV volume
accordingly.
Unplug the TV for 30 seconds, then try operating it again.
Make sure the wall outlet is working.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission
window).
Check the battery terminals.
Ensure that the signal cable is firmly connected to the PC
and DVI source.
Check the maximum resolution and connected device's
Video frequency.
Compare these values with the data in the Display Modes.
Please check the digital signal strength and input antenna.
Adjust the Brightness and Contrast. / Adjust the Fine
tuning.
English - 34
2009-11-10 9:30:45