Cisco 12 series Instrukcja obsługi systemu - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi systemu dla Telefon IP Cisco 12 series. Cisco 12 series 36 stron. Cisco unified ip phones chapter 43
Również dla Cisco 12 series: Instrukcja obsługi systemu (50 strony)
Drukuj stronę
Phone Button Templates
Table 43-2
Phone Button Template Name
Standard 30 SP+
Standard 30 VIP
Standard 12 Series, including
the 12 S, 12 SP, and 12 SP+
Standard VGC Phone
Default VGC Virtual Phone
Standard ATA 186
ISDN BRI Phone
Default IP Communicator
Standard IP-STE
Standard Analog
Third-Party SIP Device
(Advanced)
Third-Party SIP Device (Basic) The Generic SIP Phone - 2 Lines template, which is used for
StandardCN622
Standard Cisco TelePresence
Cisco Unified CallManager System Guide
43-14
Default Phone Button Templates Listed by Model (continued)
Template Description
The Standard 30 SP+ template uses buttons 1 through 4 for lines,
button 5 for call park, buttons 6 through 8 and 17 through 21 remain
undefined, and buttons 9 through 13 and 22 through 25 apply for
speed dial; button 14 applies for message-waiting indicator, button
15 for forward, and button 16 for conference.
For only the Cisco IP Phone model 30 SP+, assign button 26
Note
for automatic echo cancellation (AEC).
The Standard 30 VIP template uses buttons 1 through 4 for lines,
button 5 for call park, buttons 6 through 13 and 22 through 26 for
speed dial, button 14 for message-waiting indicator, button 15 for
call forward, and button 16 for conference.
The Standard 12 S, Standard 12 SP, and Standard 12 SP + templates
use buttons 1 and 2 for lines, button 3 for redial, buttons 4 through
6 for speed dial, button 7 for hold, button 8 for transfer, button 9 for
forwarding, button 10 for call park, button 11 for message waiting,
and button 12 for conference.
The Standard VGC Phone template for the Cisco VG248 Gateway
uses button 1 for a line and buttons 2 through 10 for speed dials.
The Default VGC Virtual Phone template for the Cisco VGC Virtual
Phone uses button 1 for line 1.
The Standard ATA 186 template uses button 1 for a line and buttons
2 through 10 for speed dials.
The ISDN BRI Phone template uses button 1 for line 1.
The Default IP Communicator template uses buttons 1 and 2 for
lines and assigns buttons 3 through 8 as speed dials. Access other
phone features, such as call park, call forward, redial, hold, resume,
voice-messaging system, conferencing, and so on, by using softkeys
(by configuring the softkey template to the phone).
The Standard IP-STE template uses buttons 1 and 2 for lines.
The Standard Analog template for analog phones uses button 1 for
line 1.
The Generic SIP Phone - 2 Lines template, which is used for
third-party SIP phones, uses buttons 1 and 2 for lines.
third-party SIP phones, uses buttons 1 and 2 for lines.
The StandardCN622 template, used for the Static SIP Mobile
Subscriber, uses buttons 1 through 6 for lines.
The Standard Cisco TelePresence template, required by Cisco
TelePresence, uses buttons 1 and 2 for lines and buttons 3 through
42 for speed dials.
Chapter 43
Cisco Unified IP Phones
OL-14153-01