DIGITAL FORECAST Bridge RS16x16 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Router sieciowy DIGITAL FORECAST Bridge RS16x16. DIGITAL FORECAST Bridge RS16x16 11 stron. Hd/sd/3g sdi matrix router

Drukuj stronę

3. Way of use

Input / Output Setting

To connect the Video source to the INPUT BNC.

To connect the OUTPUT BNC to the input of the equipment that I want try to send the display

equipment and source .

The ON cases the ENABLE button, press the ENABLE button for more than 1 second .

Select the same OUTPUT button and OUTPUT BNC number which is connected to the

equipment that I want try to send the display equipment and source.

Screen output or by pressing the same button as the other INPUT BNC and concatenate

number and transmitted to the appropriate equipment . If all of the settings are completed , ON

causes the ENABLE button press again the ENABLE button.※ equipment seen has to be

selected after selecting the input button the output button first in such a way as above because

it is designed as an output reference .

FUNCTION KEY Operating

As the ENABLE button state is on, and press the FUNCTION KEY, It means that four right

buttons and four left buttons are ON.

(However, should a state of being turned ON ENABLE button.)

The left side is a save button, the right side data load button. Save and load data is possible up

to four each. If select the left button to become saved in the appropriate number.

Press the right button to become loaded the value of the corresponding number, it changed into

the initial state. (The input port is to the first port of loading values reveal.)

Notices

This device button after selecting the first output in the same way as above because it is

designed to be output should be selected based on the input buttons . Additionally, If the

ENABLE button is ON , it does not communicate.