Cisco 6961 - Unified IP Phone Standard VoIP Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Telefon IP Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 6 stron. Unified communications manager express
Również dla Cisco 6961 - Unified IP Phone Standard VoIP: Arkusz danych (5 strony), Informacje o wersji (18 strony), Arkusz danych (5 strony), Podręcznik użytkownika (38 strony), Podręcznik administracyjny (14 strony), Instrukcja konfiguracji (16 strony), Cechy (29 strony), Podręcznik referencyjny (4 strony), Podręcznik administracyjny (19 strony), Skrócona karta informacyjna (2 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę
Cisco 6961 - Unified IP Phone Standard VoIP Instrukcja obsługi
Guide to using your CISCO IP 6961 phone at Imperial College
How to change you the volume of
the handset, headset or ringer
How to change the contrast of the
screen
Do Not Disturb [DND]
For the Imperial College
Switchboard
To log a fault
To place a telecom works/ mobile/
Blackberry/ Billing change order
Issued on 11.02.2013
To adjust the handset/ headset volume
1. Lift the receiver/ press the
2. Use the Volume + and - button
acceptable level
3. Hang up receiver/ / press the
To adjust the ringer volume
Use the black up and down buttons nearest to where you put the
handset receiver until the volume is at an acceptable level
1. Press Applications button
2. Select Preferences. (Use the Navigation bar and button to scroll
and select.)
3. Select Contrast
4. Set the contrast to the level you prefer. (Use the Navigation bar's
up and down buttons to adjust the contrast.)
Press the Save softkey
5.
To Activate the Do Not Disturb (i.e. stop the phone ringing)
1. Press DND
Screen will change and display DND is on
To Deactivate the Do Not Disturb (i.e. allow the phone to ring)
1. Press DND
Screen will change and display DND is off briefly before returning to the
default screen
Dial
0 (Externally (020)7 589 5111)
All internal calls for the Imperial College switchboard (by dialing 0) will be
answered by the Interactive Voice Response (IVR) system. To get to the
operator when the IVR answers, press 0 again or say OPERATOR
Dial
49049 (Externally (020)7 59 49049)
Please have the following details ready:
Extension which has fault
Socket Reference
Location of the faulty Extension (i.e. room number, building
and campus )
Alternative Contact number
Alternatively, you can log a fault by completing a fault form on:
www.imperial.ac.uk/ict/services/telephones/reportingtelephonefaults
Please contact your telecom rep. Your tel. rep can be found on
www.imperial.ac.uk/ict/services/telephones/reportingtelephonefaults
Page 6 of 6
so the button is lit up
until the volume is at an
so the button is not lit up
Produced by Karen Vincent