Epson 7850p - PowerLite XGA LCD Projector Podręcznik z informacjami o produkcie - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik z informacjami o produkcie dla Projektor Epson 7850p - PowerLite XGA LCD Projector. Epson 7850p - PowerLite XGA LCD Projector 25 stron. Release of check tool for network projectors v1.00 for windows
Również dla Epson 7850p - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Podręcznik użytkownika (12 strony), Części zamienne (1 strony), Instrukcja obsługi (47 strony), Biuletyn wsparcia produktu (30 strony), Instrukcja instalacji (5 strony), Szybka konfiguracja (2 strony), Broszura i specyfikacje (2 strony), Streszczenie techniczne (7 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (42 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (34 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

Drukuj stronę

Epson 7850p - PowerLite XGA LCD Projector Podręcznik z informacjami o produkcie

EPSON PowerLite 7850p Projector

Button

Function

Preview

Previews connected sources (see page 5).

Preset

Selects a preset selection of options for displaying

computer images.

Auto

Optimizes a computer image.

Wall Shot

Adjusts the colors for projecting on a wall,

blackboard, or other surface.

Volume

Increases or decreases the sound.

Num

Turns on the numeric keypad. (Press this key until

it lights.)

Sets the remote control ID (see "Setting the

Remote Control ID" on page 11).

Note: If the projector does not respond to the remote control, make

sure batteries are installed and the switch on its side is turned on.

The projector also might not respond if the batteries are weak,

you're standing at too great a distance from the projector, ambient

light is too bright, a certain type of fluorescent light is present, a

strong light source (such as direct sunlight) shines into the infrared

receiver, or other equipment emitting infrared energy is present

(such as a radiant room heater).

Using the Control Panel

This table summarizes the functions of the buttons on top of

the projector.

Button

Function

Power

Turns the projector on or off.

Help

Displays the online help menu.

Computer/

Switches the source signal among EasyMP and

DVI

equipment connected to the

Video/BNC

Switches the source signal among equipment

connected to the

Displays the on-screen menu system.

ESC

Pressing

previous menu.

Enter

Auto/Enter

Use as

button to select an option when the

menu or help system is active. When computer images

are displayed, press to auto-adjust the image.

Tracking

Let you manually eliminate vertical banding that may

buttons

be present in some computer images. Use the

Tracking

buttons as arrow keys to navigate the on-

screen menu and help systems.

EPSON PowerLite 7850p Projector

Computer

Video

S-Video

BNC

, or

ports.

while viewing a menu displays the

Button

Sync

buttons

Shift

A/V Mute

Resize

Keystone

buttons

Volume

Controlling Multiple Projectors

If you're using more than one projector for your presentation,

you can use the projector's ID system to switch between them

using a single remote control. To do this, you need to set a

different ID for each projector. During the presentation, it's

easy to change the remote control's ID to match that of the

projector you want to use. When you want to switch, simply

change the remote control's ID to match that of your second

projector.

Setting the Projector ID

The projector's default ID is 1. If you need to change it,

follow these steps:

1. Access the projector's Advanced2 menu, highlight

Projector ID

DVI

ports.

2. Press the right or left side of the

increase or decrease the ID value.

3. Press

4. When done, press

6/03

Function

Let you manually correct blurriness that may be

present in some computer images. Use the

buttons as arrow keys to navigate the on-screen menu

and help systems.

Press and hold to use the

Turns off audio and video, displaying the black, blue,

or user logo background. Press again to turn audio

and video back on.

Adjusts how an image fits into the display area.

Square an image that is keystone-shaped, or wider on

one side. (When used while pressing the

Sync

these function as

and

descriptions above.)

Increases or decreases the sound.

and press

Enter

Video

Brightness Control

Audio

: 1

Projector ID

Effect

Network

Setting

COM Port

User's Logo

Auto setup

Advanced1

BNC Sync Termination

Advanced2

Reset

About

Reset All

[ ESC ]: Return

[

]: Select

[

]: Set

to set the value.

Enter

to exit the menu system.

ESC

Sync

Tracking

Sync

and

buttons.

Shift

button,

Tracking

buttons; see

High

Low

Set

RS-232C

USB

OFF

ON OFF

OFF

Execute

[Menu]: Exit

pointer button to