Epson 7900p - PowerLite XGA LCD Projector Informacje o produkcie - Strona 7

Przeglądaj online lub pobierz pdf Informacje o produkcie dla Projektor Epson 7900p - PowerLite XGA LCD Projector. Epson 7900p - PowerLite XGA LCD Projector 24 stron. Supplemental / late breaking information
Również dla Epson 7900p - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Części zamienne (1 strony), Szybka konfiguracja (2 strony), Podręcznik użytkownika (1 strony), Streszczenie techniczne (7 strony), Biuletyn wsparcia produktu (7 strony), Instalacja obiektywu (5 strony)

Drukuj stronę

Epson 7900p - PowerLite XGA LCD Projector Informacje o produkcie

2. Click the

icon.

Arrange

Drag one monitor

icon on top of

the other

3. Drag one monitor icon on top of the other.

If the Arrange option isn't available, you may need to select

one of the Simulscan resolution settings:

1. Click the

icon.

Monitor

Click here

2. Select a

resolution as shown. (Allow a few

Simulscan

seconds for the projector to sync up after making the

selection.)

Adjusting the Image

Once you see your image, you may need to make certain

adjustments.

Focusing and Zooming Your Image

Use the Focus ring on the projector to sharpen the image.

Focus ring

Click here

Select a

Simulscan

resolution

Zoom ring

Epson PowerLite 7900p Projector

Use the Zoom ring on the projector to reduce or enlarge the

projected image. Move the tab toward the

bigger, or toward the

If the image still isn't large enough, you may need to move the

projector farther away from the screen. You can also use the

buttons on the remote control to zoom in on a

E-Zoom

portion of the image.

Adjusting the Height of Your Image

If the image is too low on the screen, you can raise it by

adjusting the front foot:

1. Stand behind the projector. Press the blue foot release lever

up and lift the front of the projector.

2. Once the image is positioned where you want it, release the

lever to lock the foot in position.

3. If necessary, you can fine-

tune the height by turning

the projector's rear feet.

Raising the projector may cause the image to distort or

"keystone." See the next section to correct this.

Adjusting the Image Shape

In most cases, you can maintain a rectangular image by

placing the projector directly in front of the center of the

screen with the base of the lens level with the bottom of the

screen.

Even if the projector is slightly tilted (within a range of 40° up

or down), the projector's automatic keystone correction

function detects and corrects vertical keystone distortion.

Projector tilted up

9/04

to make it

to make it smaller.

Rear projector foot

Corrected image

Projector tilted down

Epson PowerLite 7900p Projector