Epson 821p - PowerLite XGA LCD Projector Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Projektor Epson 821p - PowerLite XGA LCD Projector. Epson 821p - PowerLite XGA LCD Projector 42 stron. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Również dla Epson 821p - PowerLite XGA LCD Projector: Specyfikacje (2 strony), Instrukcja obsługi (47 strony), Lista części (1 strony), Szybka konfiguracja (2 strony), Informacje o produkcie (15 strony), Podręcznik użytkownika (1 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (8 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

Operating environment

Limitations imposed by a Windows Vista

environment.

When using EMP Monitor under Windows Vista, note the following

limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EMP Monitor.

• Even after EMP Monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no

longer required, you may delete the EMP Monitor V4.30 folder.

Provided the default settings were used at installation, this folder can be

found at:

"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EMP Monitor V4.30"

Check the following points before starting up EMP Monitor.

• EMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000/Windows NT4.0/Windows XP/Windows

Vista, the computer must be started up in Administrator mode.

• Depending on the projector model, a commercially-available serial

TCP/IP conversion adapter and a connection cable are required in

order to use EMP Monitor. s Projector User's Guide "

Make the settings for the serial TCP/IP conversion adapter before

connecting to the projector.