Siemens avantGarde SKU HB30D50U Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Piekarnik Siemens avantGarde SKU HB30D50U. Siemens avantGarde SKU HB30D50U 21 stron. Built-in ovens
Również dla Siemens avantGarde SKU HB30D50U: Cechy i korzyści (1 strony)
Drukuj stronę
Important Safety Instructions
Important Safety Instructions ............................................................................................... 1
Preparation .......................................................................................................................... 2
Installation .......................................................................................................................... 4
Final Steps ........................................................................................................................... 5
Please read all instructions before using this appliance.
If the information in this manual is not followed exactly, a fi re or explosion may result
PARTS NEEDED:
•
Tape Measure
•
Straight Edge or Ruler
•
Phillips Head Screwdriver
•
Level
•
Pencil
•
Wire Cutters or Wire Stripper
•
Wire Nuts
•
Volt Meter (0-250 VAC)
•
1" Hole Saw
•
Hand or Saber Saw
•
Drill and Drill Bit
•
Safety Gloves and Goggles
•
Cloth or cardboard (Optional - to Protect Floor)
WARNING
Before installing, turn power OFF at the service
panel. Lock service panel to prevent power from
being turned ON accidentally.
CAUTION
Do not use the oven for storage.
Unit is heavy and requires at least two people or
proper equipment to move.
Important:
Save these instructions for the local inspector's use.
Installer:
Please leave the instructions with the unit for the
owner
Owner:
Please save these instructions for future reference.
Table of Contents
WARNING
causing property damage, personal injury or death.
•
Remove all tape and packaging before using
the oven. Destroy the packaging after unpacking
the oven. Never allow children to play with
packaging material.
Be sure your appliance is properly installed
•
and grounded by a qualifi ed technician in
accordance with the National Electrical Code ANSI/
NFPA No. 7 latest edition (or the Canadian Electric
Code) and local electrical code requirements.
Important: Local codes vary. Installation, electrical
connections and grounding must comply with all
applicable codes.
•
Install only per installation instructions
provided in the literature package for this
oven.
•
Ask your dealer to recommend a qualifi ed
technician and an authorized repair service.
Know how to disconnect the power to the
•
oven at the circuit breaker or fuse box in case of
an emergency.
Do not repair or replace any part of the
•
appliance unless specifi cally recommended
in the manuals. All other servicing should be
done by a qualifi ed technician. This may reduce
the risk of personal injury and damage to the
oven.
•
Never modify or alter the construction of an
oven by removing panels, wire covers, screws, or
any other part of the product.
•
DO NOT LIFT OVEN BY DOOR HANDLE.
Remove the door for easier handling and installa-
tion. See 'Removing the Oven Door' in the Mainte-
nance section of the Use and Care Manual.
English •
1