Siemens CB675GB 1 Series Instrukcja obsługi - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piekarnik Siemens CB675GB 1 Series. Siemens CB675GB 1 Series 44 stron.
Drukuj stronę
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Time-setting option
Use
Timer
The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.
Cooking time
A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End
Set a cooking time and an end time. The
*
appliance switches on automatically so
that the operation ends at the desired
time.
Notes
A cooking time of up to one hour can be set exactly
■
to the minute.
A cooking time of over one hour can be set in 5-
minute increments.
Depending on which direction you turn the rotary
■
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
■
sounds.
Using the l button, you can request information
■
during operation, which then appears briefly in the
display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
Press the 0 button.
1.
The field for the timer opens.
Use the rotary selector to set the timer duration.
2.
The timer starts after a few seconds.
The U symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the 0 button to cancel the audible
signal early.
Cancelling the timer duration
Press the 0 button to open the time-setting options
menu and turn the time back. Press the 0 button to
close the menu.
Changing the timer duration
Use the 0 button to open the time-setting options menu
and change the timer time in the next few seconds
using the rotary selector. Start the timer with the
0 button.
Cooking time
If you set the cooking time for your food, operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
Press the 0 button.
1.
The time-setting options menu opens.
Set the cooking time using the rotary selector.
2.
Press the Start/Stop button to start.
3.
You can see the cooking time x counting down in
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the 0 button.
Cancelling the cooking time
Press the 0 button to open the time-setting options
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
Changing the cooking time
Press the 0 button to open the time-setting options
menu. Change the cooking time using the rotary
selector.
End time
If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu 0 is open.
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
Time-setting options
en
15