Siemens CD914GX 1 Series Podręcznik użytkownika i instrukcje instalacji - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika i instrukcje instalacji dla Piekarnik Siemens CD914GX 1 Series. Siemens CD914GX 1 Series 44 stron.
Drukuj stronę
en Time-setting options
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Notes
¡ When you start the steam type of heating , the
cooking time does not begin to count down until the
set temperature has been reached.
¡ If you open the appliance door while the steam type
of heating
is in progress, the operation stops.
When you close the appliance door, the timer does
not resume its countdown until the appliance has
reached the set temperature again.
Changing the cooking time
You can change the cooking time at any time.
1.
Press the cooking time.
2.
Change the cooking time using
via the adjustment bar.
3.
Press "Apply".
Cancelling the cooking time
You can cancel the cooking time at any time.
1.
Press the cooking time.
2.
Reset the cooking time using
3.
Press "Apply".
9.2 Setting the end time
You can delay the time at which the cooking time for
the operation is due to end by up to 24 hours.
Notes
¡ To achieve good cooking results, do not delay the
time once the operation has already started.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ An operating mode and temperature have been set.
¡ A cooking time is set.
1.
Press "End time".
2.
Use
or
to delay the time.
If required, use
to reset the setting value.
3.
Press "Apply".
4.
Press
to start the operation.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
5.
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
12
to switch the ap-
or
, or directly
.
to switch the ap-
Setting the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1.
Press "End time".
2.
Use
or
to change the time.
3.
Press "Apply".
Cancelling the end time
You can delete the set time at any time.
1.
Press "Stop"
2.
Press "End time"
3.
Use
to reset the time.
Note: For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
4.
Press "Start"
9.3 Setting the timer
The timer runs independently during the operation. You
can set the timer when the appliance is switched on or
off, up to 24 hours. The timer has its own signal tone
so that you can tell whether it is the timer or a cooking
time that has elapsed.
1.
Press the
button.
2.
To set the timer, press the relevant time value on
the display, e.g. hour display "h" or minute display
"min".
a The selected value is marked in blue.
3.
Set the timer using
ment bar.
If required, use
to reset the adjustment value.
4.
To start the timer, press "Start".
a The timer counts down.
a The timer remains visible on the display if the appli-
ance is switched off.
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status bar.
a Once the timer has elapsed, a signal tone sounds.
A note appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
1.
Press the
button.
2.
Press "Pause".
3.
Change the timer.
4.
Press "Start".
Cancelling the timer
You can cancel the timer at any time.
1.
Press the
button.
2.
Reset the timer using
3.
Press "Start".
or
or directly via the adjust-
.