Epson 8300NL - PowerLite XGA LCD Projector Skrócona instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Projektor Epson 8300NL - PowerLite XGA LCD Projector. Epson 8300NL - PowerLite XGA LCD Projector 20 stron. With easymp.net option
Również dla Epson 8300NL - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Szybka konfiguracja (2 strony), Biuletyn wsparcia produktu (27 strony), Lista części (1 strony), Broszura i specyfikacje (2 strony), Streszczenie techniczne (7 strony), Biuletyn wsparcia produktu (42 strony)

Drukuj stronę
Epson 8300NL - PowerLite XGA LCD Projector Skrócona instrukcja obsługi
3. EMP NetworkManager connects to the projector, and you
see this screen:
4. Verify that the network settings are correct.
Make any desired changes to the projector's network
address configuration (turning off DHCP enables the
manual settings).
You can give the projector a name—up to 15 characters
long, including the hyphen (-) symbol.
Naming the projector helps you identify it in EMP
Monitor and EMP NetworkManager. This is especially
useful if you're managing more than a few projectors.
5. Click
Mail Notification Settings
6. Select
for the Mail Notification setting.
ON
7. Enter the IP address and port number of the SMTP server
used for sending e-mail. (The port's default setting is 25,
but you can enter any number from 1 to 65535.)
8. Enter up to three e-mail addresses where you want the
event notification messages to be sent.
9. Click the
Setting a Notification Event
address, then select the conditions under which you want a
message to be sent.
10. Click
, then on the next screen click
OK
needed.
. You see this screen:
button next to each
. Confirm as
Set
EPSON PowerLite 8300i Projector
11. When you see the test message window, you can send a
message with the heading "TEST MAIL" to the addresses
you have entered. The projector's name and IP address are
included in the body of the message.
12. When done making all your projector settings, close the
EMP NetworkManager. (It does not have to be open for
messages to be sent or received.)
Understanding the E-mail Messages
If a projector experiences a problem, it sends an e-mail
message to each of the addresses you provided using EMP
NetworkManager. The message includes the heading
"EPSON Projector" in the subject line.
The body of the message contains:
the name of the projector
the projector's IP address
a description of the problem
If a plus (+) sign appears before the description, it indicates
that a problem has occurred. A minus (–) sign appears when
the problem goes away or is resolved.
5/03
EPSON PowerLite 8300i Projector
15
-