Digital Home Systems DHS-ZW-SNDW-01 Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Czujniki bezpieczeństwa Digital Home Systems DHS-ZW-SNDW-01. Digital Home Systems DHS-ZW-SNDW-01 5 stron. Z-wave door/window sensor

Digital Home Systems Pty Ltd
Integration Manual for Mi Casa Verde Vera 2/3/Lite (UI5)
1.2 Exclusion from Z-Wave home network
1.2.1 Press the Z-Wave button on the Vera for at least 7 sec and release, the Z-Wave LED will start to flash fast, check
the system interface for the following message:
1.2.2 Press the switch at the back of the DHS-ZW-SNDW-01, the Z-Wave LED on the Vera will flash quickly for a couple
seconds, the following message will appear on the system interface:
1.3 Inclusion to Z-Wave home network
1.3.1 Press the Z-Wave button on the Vera, the Z-Wave LED on the Vera will flash slowly, the following message will
appear on the system interface:
1.3.2 Press the switch at the back of the DHS-ZW-SNDW-01, the Z-Wave LED on the Vera will flash quickly for a couple
seconds, the following message will appear on the system interface:
Please note that the Node and Device number in the above screen are only examples
1.3.3 Press the Z-Wave button on the Vera to exit the inclusion mode, the Vera will process Z-Wave reconfiguration.
1.4
After the Vera finishes Z-Wave reconfiguration and the Z-Wave LED is on, go into 'Devices/All' in the system interface, you
will find the DHS-ZW-SNDW-01 as '_Door/Window sensor' under no room.
2
PO Box 353
Rosanna, Victoria
3084
Australia