Load indicator/
To activate, first open the door, set the programme and then
recommended dosage
load the items of laundry.
ge 9
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Detergents and care products
Amount of laundry, level of soiling, water hardness (ask your water supply company) and
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation: Open the detergent drawer with care.
Dilute thick fabric softener and care products with water.
This prevents blockages.
Open the door / set the programme*
*If the childlock is active
Follow the instructions in the display panel.
Start/
Reload
buttons
perature
– – = cold)
Select individual settings
Spin
o spin during the
Set temperature / spin speed
nce)
ve and need only
Sorting the laundry
page 7.
page 9.
Measure accordingly:
manufacturer's instructions.
Models without insert for liquid detergent:
1
Deactivate, page 5.
2
Load laundry
Observe the load display on the dis-
play panel
page 9
3
Add detergent and
care products
Observe the dosage recommenda-
tion for detergent on the display
panel
page 9
4
Close the washing
machine door
page 5.
Stain selection
page 6.
page 2.
Washing
Detergent drawer
with compartments I, II,
Washing machine door
Control panel
Washing machine door
handle
Drum interior light
(depending on model) comes on when the
door is opened or closed, or when a
programme is started; goes out
automatically.
5
Washing
Press Start/Reload
3
Switching off
Turn the programme selector to Off.
Turning off the tap
Not required for AquaStop models
Installation instructions, page 7.
Removing the washing
Open the washing machine door and remove the washing.
If
Rinse Hold (no final spin) is active: turn the programme
selector to Drain or Spin. Select the spin speed if necessary.
Select Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent drawer
open so that any residual water can evaporate.
Programme finished when ...
... Finished, Remove washing appears on the display panel.
If the display panel lighting is off, press any button
Cancelling the programme
Programmes at high temperatures:
– Cool laundry: Select Rinse.
– Select Start/Reload.
6
Programmes at low temperatures:
– Select Spin or Drain.
– Select Start/Reload.
Changing the programme, if...
... you have selected the wrong programme by mistake:
Service flap
– Reselect the programme.
– Select Start/Reload. The new programme starts from the beginning.
Adding laundry ...
... if Start/Reload is selected and Top-up appears in the display panel.
– Do not leave the washing machine door open for too long as
water from the washing could leak out.
– Load display not active when reloading.
Select Start/Reload.
Energy saving mode, page 1.
page 6
4