Siemens WM..T SERIES Instrukcja obsługi i instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja instalacji dla Spryskiwacz Siemens WM..T SERIES. Siemens WM..T SERIES 40 stron.

Drukuj stronę

( Mains cable

0 Bag:

Installation and operating

■

instructions

After-sales service location

■

directory*

Warranty*

■

Cover caps for openings left

■

after removing the transport

locks

Wrench*

■

8 Water drain hose

@ Elbow for securing the water drain

hose*

H Water supply hose on standard/

Aqua-Secure models

P Water filter*

*depending on the model

In addition, a hose clamp (24 - 40 mm

diameter, available from specialist

dealers) is required to connect the

water drain hose to a siphon.

Useful tools

Spirit level for levelling

■

Wrench with:

■

– WAF 13 for loosening the

transport locks, and

– WAF 17 for aligning the

appliance feet

Safety instructions

Warning

Risk of injury!

The washing machine is very heavy.

■

Be careful when lifting/transporting

the washing machine.

When the washing machine is lifted

■

by its protruding parts (e.g. the

washing machine door), the

components may break off and

cause injuries.

Do not lift the washing machine by

protruding parts.

Positioning and connecting

If the hose and mains cables are not

■

routed properly, there is a risk of

tripping and injury.

Lay hoses and cables in such a way

that there is no risk of tripping.

Caution!

Damage to the appliance

Frozen hoses may rip/burst.

Do not install the washing machine in

areas exposed to frost or outdoors.

Caution!

Water damage

The connection points for the water

supply hose and water drain hose are

under high water pressure. To prevent

leaks and water damage, you must

follow the instructions in this section.

Notes

In addition to the safety information

■

listed here, the local water and

electricity supplier may have special

requirements.

If in doubt, have the appliance

■

connected by a specialist.

Installation surface

The washing machine must be

Note:

aligned in a stable manner so that it

does not move around.

The installation surface must be firm

■

and level.

Soft floors/floor coverings are not

■

suitable.