Siemens WM12K160HK Instrukcja obsługi i instrukcja instalacji - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja instalacji dla Spryskiwacz Siemens WM12K160HK. Siemens WM12K160HK 40 stron.
Drukuj stronę
Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.
Always wait for the end of the
■
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
If the display panel goes off at the
■
end of a programme, energy-saving
mode is active. To activate the panel,
press any button.
H
Sensors
A utomatic load sensing
S e n s o r s
The automatic load-sensing function
perfectly adapts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping the drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Place large and small items of
Note:
laundry evenly in the drum.
~ "Faults and what to do about them"
on page 26
VoltMonitor
The automatic voltage control system
detects unauthorised voltage drops
during the washing process.
Whenever there is an
Note:
undervoltage, the colon flashes on the
Ready in display on the display panel.
When the supply voltage is stable again,
the programme continues running. The
colon on the Ready in display stops
flashing.
If the interruption causes the
programme to be extended, the dot on
the display flashes.
The voltage control system is activated
when a program is started.
Sensors
en
21