Epson AP-60 - Projector Sound Solution Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Projektor Epson AP-60 - Projector Sound Solution. Epson AP-60 - Projector Sound Solution 28 stron. Projector sound solution
Również dla Epson AP-60 - Projector Sound Solution: Podręcznik użytkownika (28 strony), Podręcznik (5 strony), Instrukcja połączenia (1 strony), Lista części (1 strony), Broszura i specyfikacje (4 strony), Biuletyn wsparcia produktu (8 strony)

Planning the Installation

Here are the basic steps required to install the AP-60. Allow at least 1 to 2 hours to complete the installation. Be

sure to read all of the installation instructions before starting.

Note

Epson strongly recommends that the AP-60 be installed by a professional audio/video installer or other qualified

professional. Epson cannot provide advice concerning construction practices or building codes in your area.

The Installation requires at least two people.

For added safety, install the included guy wires to prevent the AP-60 from falling. Ensure that the ceiling is strong enough

before installing the wires.

Install the mounting pipe. See page 13.

Install projector and connect cables.

See page 19.

Install the IR dome sensor. See page 11.

Install the AP-60 and connect cables.

See page 14.

Adjust the sound. See page 21.