Cisco 7916 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco 7916. Cisco 7916 9 stron. Phone systems express key expansion module
Również dla Cisco 7916: Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (9 strony), Instrukcja obsługi telefonu (27 strony)

•

If you are using Power Over Ethernet (PoE) to power your 7975 IP Phone, you will need a power

supply unit for your 7916 Key Expansion Module.

•

If you are using a power supply to power your 7975 and only using one 7916 Key Expansion

Module, you do NOT need a power supply. If you are using two Key Expansion Modules, you will

need an additional power supply.

Removing the Footstand

Step 1 Unplug the network and power connections.

Step 2 Unplug the handset, and unplug the headset if one is attached to the phone.

Step 3 Turn the phone over and lay it on a protected flat surface to prevent it from being scratched.

Step 4 Locate the two foot pins on the footstand.

Step 5 Use a flathead screw driver to carefully push on one of the foot pins to release it. Then carefully

push on the other foot pin to release it.

Step 6 Lift off the footstand and store it separately.