Siemens XQG80-WM10P1R81W Instrukcja obsługi i instrukcja instalacji - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja instalacji dla Spryskiwacz Siemens XQG80-WM10P1R81W. Siemens XQG80-WM10P1R81W 40 stron.
Również dla Siemens XQG80-WM10P1R81W: Instrukcja obsługi i instrukcja instalacji (34 strony)

Siemens XQG80-WM10P1R81W Instrukcja obsługi i instrukcja instalacji

Cleaning and maintenance

en
2
Cleaning and
maintenance
:
Warning
C l e a n i n g a n d m a i n t e n a n c e
Risk of death!
There is a risk of electric shock if touch
live components.
Switch off the appliance and pull out the
mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
Machine housing/Control
panel
Immediately remove washing and
cleaning agent residue.
Wipe with a soft, damp cloth.
Do not use abrasive cloths, sponges
or detergents (stainless steel
cleaner).
Do not clean the appliance with a
water jet.

Drum

Use chlorine-free cleaning agent, not
steel wool.
22

Descaling

Not required if detergent dosed
correctly. However, if this does occur,
follow the instructions of the descaling
agent manufacturer.
Cleaning the detergent
dispenser
If it contains detergent or fabric softener
residue:
Pull out, depress insert, take out
1.
drawer all the way.
Take out insert: using your finger,
2.
press insert upwards.
Clean detergent dispenser and
3.
insert with water and a brush and
dry.
Attach insert and lock into position
4.
(push cylinder onto guide pin).
Insert detergent drawer.
5.
Leave detergent drawer open so
Note:
that residual water can evaporate.
Cleaning the measuring aid A
for liquid detergent
If it contains liquid detergent residue:
Hold the mearsuring aid, pull the
1.
cover upward and disconnect them.
*
depending on the model
*