Cisco 7925G - Unified Wireless IP Phone VoIP Podręcznik użytkownika - Strona 20

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco 7925G - Unified Wireless IP Phone VoIP. Cisco 7925G - Unified Wireless IP Phone VoIP 28 stron. Wavelink avalanche management console
Również dla Cisco 7925G - Unified Wireless IP Phone VoIP: Arkusz danych (8 strony), Informacje o wersji (16 strony), Instrukcja obsługi akcesoriów (20 strony), Instrukcja obsługi akcesoriów (13 strony), Podręcznik administracyjny (19 strony), Podręcznik użytkownika (10 strony), Podręcznik użytkownika (16 strony), Skrócona instrukcja obsługi (14 strony), Podręcznik administracyjny (23 strony), Instrukcja instalacji (21 strony), Podręcznik administracyjny (14 strony)

Press

to toggle back to the handset.

Switch to the Desktop Charger Speakerphone

1. Place the wireless IP phone in the desktop charger cradle. "AC connected!" displays on the screen.

2. Press down on the top of the phone. "Docking connected!" displays on the screen and the

status line. The desktop charger speaker and microphone are connected.

3. Place and receive calls. Use all the buttons on your phone, including

You can use the headset to answer calls when the phone is in the desktop charger. The internal, single-direction

Note

microphone is located on the lower left side of the phone (two small holes). For best results, place the desktop charger

in front of you when using the speakerphone.

Switch to the Handset from the Desktop Charger Speakerphone

1. Hold the top of the phone and move it forward before lifting it off the desktop charger.

2. Use the handset to continue with the call. The desktop charger speaker and microphone disconnect.

You cannot turn off the desktop speaker by using the

Note

Adjust the Volume Level for a Call

During a call, press

to adjust the volume for the handset, speaker, headset or desktop charger.

The new volume level is preserved for future calls after the phone is powered off.

Note

Obtaining a Headset

Your phone supports headset jack types with a 2.5 mm, 3-band/ 4 connector. For information about purchasing headsets, see

Headset Information, page

AutoAnswer

You might use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of others. Your system

administrator configures AutoAnswer to work with either your speaker mode or headset.

Use AutoAnswer with a Headset

Keep headset mode active by ensuring the headset is plugged into the phone, even when not on a call.

If your phone is set up to use AutoAnswer in headset mode, calls are answered automatically only if the

status line. Otherwise, calls ring normally and you must manually answer them.

Use AutoAnswer with the Desktop Charger Speaker

Keep the handset in the desktop charger cradle, so the speaker is active.

If your phone is set up to use AutoAnswer in speaker mode, calls are answered automatically using the desktop charger speaker.

You cannot turn off the desktop charger speaker. You must remove the phone from the cradle to disable the desktop

Note

charger speaker.

10.

and

button.

icon displays on the phone

icon is in the phone