Cisco 7925G - Unified Wireless IP Phone VoIP Podręcznik użytkownika - Strona 24

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco 7925G - Unified Wireless IP Phone VoIP. Cisco 7925G - Unified Wireless IP Phone VoIP 28 stron. Wavelink avalanche management console
Również dla Cisco 7925G - Unified Wireless IP Phone VoIP: Arkusz danych (8 strony), Informacje o wersji (16 strony), Instrukcja obsługi akcesoriów (20 strony), Instrukcja obsługi akcesoriów (13 strony), Podręcznik administracyjny (19 strony), Podręcznik użytkownika (10 strony), Podręcznik użytkownika (16 strony), Skrócona instrukcja obsługi (14 strony), Podręcznik administracyjny (23 strony), Instrukcja instalacji (21 strony), Podręcznik administracyjny (14 strony)

Transferring Calls

Transfer or redirects a connected call. The target is the number to which you want to transfer the call.

Transfer a call without talking to the transfer recipient

1. From an active call, choose Options >Trnsfer.

2. Dial the target number.

3. Choose Options > Trnsfer again to complete the transfer or EndCall to cancel.

If your phone supports on-hook transfer, you can alternately complete the transfer by disconnecting.

Note

Talk to the transfer recipient before transferring a call (consult transfer)

1. From an active call, choose Options > Trnsfer.

2. Dial the target number.

3. Wait for the transfer recipient to answer.

4. Choose Options > Trnsfer again to complete the transfer or EndCall to cancel.

Transferring Calls to Voice mail

To transfer a call to the recipient's voicemail, use the following method:

1. Choose Options>TrnsfVM to place the call on hold.

2. Enter the recipient's extension number and press TrnsfVM again

Cisco Extension Mobility (EM) allows you to temporarily configure a Cisco Unified IP Phone as your own. After you log in to

EM, the phone adopts your user profile, including your phone lines, features, established services, and web-based settings. Your

system administrator must configure Cisco EM for you.

1. Choose

(Services) > EM Service (name can vary).

2. Enter your user ID and PIN (provided by your system administrator).

3. If prompted, select a device profile.

Log out of Cisco EM

1. Choose

(Services) > EM Service (name can vary).

2. When prompted to log out, press Yes.

Tips

• Cisco EM automatically logs you out after a specified time. You system administrator establishes this time limit.

• Changes that you make to your Cisco EM profile (from the User Options webpages) take effect the next time that you log

in to EM on a phone.

• Settings that are controlled on the phone only are not maintained in your Cisco EM profile.