Cisco 7931G - Unified IP Phone VoIP Podręcznik administracyjny - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik administracyjny dla Telefon IP Cisco 7931G - Unified IP Phone VoIP. Cisco 7931G - Unified IP Phone VoIP 17 stron. For cisco unified callmanager express 4.0
Również dla Cisco 7931G - Unified IP Phone VoIP: Podręcznik użytkownika (20 strony), Podręcznik administracyjny (10 strony), Podręcznik administracyjny (20 strony), Instrukcje instalacji (4 strony), Podręcznik (30 strony), Podręcznik administracyjny (12 strony), Skrócona instrukcja obsługi (2 strony), Skrócona karta informacyjna (2 strony), Podręcznik użytkownika (15 strony)

Chapter 2

Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones with Auto-Registration and TAPS

Note

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1

OL-14587-01

Adding Phones to the Cisco Unified Communications Manager Database

Adding Phones with Cisco Unified Communications Manager

•

Administration, page 2-14

Adding Phones with BAT, page 2-14

•

You can add phones with auto-registration and TAPS, the Tool for

Auto-Registered Phones Support, without first gathering MAC addresses from

phones.

TAPS works with the Bulk Administration Tool (BAT) to update a batch of phones

that were already added to the Cisco Unified Communications Manager database

with dummy MAC addresses. Use TAPS to update MAC addresses and download

pre-defined configurations for phones.

Cisco recommends that you use auto-registration and TAPS to add fewer than 100

phones to your network. To add more than 100 phones to your network, use the

Bulk Administration Tool (BAT). See the

page

2-14.

To implement TAPS, you or the end-user dial a TAPS directory number and follow

voice prompts. When the process is complete, the phone will have downloaded its

directory number and other settings, and the phone will be updated in

Cisco Unified Communications Manager Administration with the correct MAC

address.

Auto-registration must be enabled in Cisco Unified Communications Manager

Administration (System > Cisco Communications Manager) for TAPS to

function.

When you configure the cluster for mixed mode through the Cisco CTL client,

auto-registration is automatically disabled. When you configure the cluster for

non-secure mode through the Cisco CTL client, auto-registration is automatically

enabled.

Refer to Cisco Unified Communications Manager Bulk Administration Guide for

detailed instructions about BAT and about TAPS.

"Adding Phones with BAT" section on

2-13