3. Enter your User ID and Password.
4. Press Submit. The phone will temporarily configure user profile and settings.
Your administrator must configure Extension Mobility for you.
Note
Place a Call from Your Extension Mobility Speed-Dial Buttons
To place a call from your Personal Speed-Dial using My Phone Apps, use the following method:
1. Log-in to Extension Mobility.
2. Select My Phone Apps and scroll down to Speed Dial Buttons.
3. Select Speed Dial Buttons
4. Add a Label and Number.
5. Go back to My Phone Apps and press Reset Phone. Your Speed-Dial Buttons will appear on the phone display screen.
Use Audio Paging
Audio paging provides a one-way voice path to the phones that have been designated to receive paging. It does not have a
press-to-answer option like the intercom feature.
To use the paging function for paging a group, use the following method:
1. Select an available phone line by lifting the handset. Listen for the dial tone.
2. Dial the designated paging group number.
Each idle IP phone that has been configured with the paging number answers automatically in speakerphone mode, and the
phone displays the caller ID.
3. When you finish speaking your message and hang up, the phones are returned to their idle states.
Use the Intercom Feature
Cisco Unified Communications Manager Express supports intercom functionality for one-way and press-to-answer voice
connections using a dedicated pair of intercoms on two phones that speed-dial each other. A line button is assigned for use as
the intercom button.
The called IP phone automatically answers the call in speakerphone mode with mute activated. A beep sounds to alert the
recipient to the incoming call.
To respond to an intercom call, press the Mute button, or lift the handset.
Activate Do Not Disturb (DND)
For visual call alerting and information without audible ringing, use DND. Calls receive normal call-forward-busy and
no-answer treatment.
To activate the Do-Not-Disturb feature, use the following method:
1. Press the more soft key to locate the DND soft key.
2. Press the DND soft key. A display text message indicates that the phone is in Do-Not-Disturb mode.
If DND is not set, pressing the DND soft key when a line is ringing forwards the call to the call-forward destination set
Note
on the phone for that call only. If the call-forward destination is not set, pressing the DND soft key disables the ringer.
To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2.
12
Drukuj stronę