Epson BrightLink 430i Specyfikacje - Strona 4
Przeglądaj online lub pobierz pdf Specyfikacje dla Projektor Epson BrightLink 430i. Epson BrightLink 430i 10 stron. Networking and technology tool guide
Drukuj stronęMonitor and control – Additional tools*
E-mail notification
The e-mail notification function can be used to send corresponding
notification messages to a preset e-mail address when a projector that
is connected to the network assumes a certain status, or experiences
a problem or alert. By using
this function, the operator
can be notified of a projector's
status or problems even
when the operator is in a
different location.
E-mail alerts
You can also set e-mail
alerts through the projector's
settings, without using the
EasyMP Monitor software.
When this feature is enabled,
the projector sends
e-mail alerts to up to three
addresses if it has any
alerts or problems.
*Available on select models. Please see individual specification sheets for details on individual products.
6
Monitor and control
Remote control on your
computer or smartphone
You can access the projector using
Web Remote, which will display
a virtual remote control on your
computer screen. It will let you perform
most of the operations available on
the physical remote control.
You can also use the Web Remote
via a smartphone, such as iPhone
®
or Blackberry.
Direct Power On/Off
The Direct Power On function enables faster setup. The projector starts
up automatically when you plug it in or turn it on with a wall switch. You
don't have to press the power button.
AMX Device Discovery
Epson projectors are equipped with AMX Device
Discovery, a technology that allows for effortless
integration with an AMX control system. The AMX
Controller recognizes the Epson projector, loads the
appropriate communications module or driver and
automatically installs it.
Using a browser to control
the projector
You can also use a standard web
browser to monitor and control the
projector through the network.
SNMP for monitoring
the projector
Network administrators can use SNMP (Simple Network Management
Protocol) to monitor projectors. You can enter up to two IP addresses.
Crestron RoomView enabled
Epson's Crestron RoomView enabled projectors will seamlessly
integrate with RoomView software without a separate A/V control box.
You can simply install RoomView Express software from Crestron's
website and start monitoring and controlling your projector.
Monitor and control
7