Siemens IQ 100 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Zmywarka Siemens IQ 100. Siemens IQ 100 8 stron.
Również dla Siemens IQ 100: Instrukcja obsługi i instalacji (43 strony), Instrukcja instalacji i użytkowania (16 strony), Instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

Individual settings

Option buttons

The spin speed and temperature can be changed before and during the selected programme

runs. The effects depend on the programme progress.

(Spin speed / without final spin)

You can change the displayed spin speed. The maximum selectable spin speed depends on

the model and on which programme is currently selected.

temp.°C (Temperature)

You can change the displayed washing temperature. The maximum washing temperature

that can be selected depends on the programme that has been set.

(Finished in)

When you select the programme, the relevant programme duration is displayed. You can

delay the start of the programme before it begins. The "finished in" time can be set in

increments of one hour up to a maximum of 24 hours. Press the

repeatedly until the required number of hours is displayed (h = hour).

Select inicio/pausa (start/pause).

Additional function

and overview of programmes, see page 7

extra

( extra rinse) Additional rinse cycle. For areas with very soft water or for further

enhancing the washing result.

Childproof lock and reloading

You can lock the washing machine to prevent the functions you have

Childproof lock/

set from being changed inadvertently.

Appliance lock

ON/OFF: Press and hold the inicio/pausa (start/pause) button for

approx. 5 seconds after the start/end of the programme.

Note: The childproof lock can remain activated until you wish to start

the next programme, even after switching off the machine.

Then you can deactivate the childproof lock before the start of the

programme and activate it again as necessary once the programme

has started.

inicio/pausa (start/pause)

For starting or interrupting the programme.

Important information

Protecting the laundry and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you

must follow the manufacturer's instructions.

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Laundry with varying degrees of soiling

light

(finished in) button

heavy

Soaking

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's

instructions. Turn the programme selector to algodón/algodão (cottons) 30 °C and select

inicio/pausa (start/pause). After approx. 10 minutes, press inicio/pausa (start/pause) to

pause the programme. Once the required soaking time has elapsed, select inicio/pausa

(start/pause) again to continue the programme, or select a different programme.

Starching

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in

accordance with the manufacturer's instructions into fabric softener compartment

if necessary).

Dyeing / Bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel.

Always follow the dye manufacturer's instructions! Do not use the washing machine for

bleaching clothes!

Information on the display panel

Wash new items of clothing separately.

Do not pre-wash. If required, choose the

programme.

Pre-treat any stains as necessary.

Do not load as much laundry. Select the program with prewash.

Load laundry of the same colour

Laundry must not be treated with fabric softener

Close the washing machine door properly; laundry may be caught.

Open the tap completely, supply hose kinked or trapped;

Clean the filter

page 10, Water pressure too low.

Detergent solution pump blocked; Clean the detergent solution pump

Drainage hose/waste pipe blocked; Clean the drainage hose at the siphon

Motor fault. Call the after-sales service.

speedPerfect

(rinse first

depending on model

page 10.