Siemens iQ500 SN56M592AU/82 Instrukcja obsługi - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Siemens iQ500 SN56M592AU/82. Siemens iQ500 SN56M592AU/82 36 stron.
Drukuj stronęT erminating the programme
T e r m i n a t i n g t h e pr o g r a m me
(Reset)
1. Press START button ` for
approx. 3 sec.
The numerical display )"
indicates :
2. The programme sequence lasts
approx. 1 min. On the digital
display )" is indicated :
3. Switch off ON/OFF switch (.
Changing the programme
When the START button ` has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).
Intensive drying
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Close the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button ` until
the digital display )"
indicated.
4. Release both buttons.
To change the setting:
1. Press the button 3 to switch the
Intensive drying on :
2. Press START button `.
The set value is saved.
.
.
: ... is
or off :
Cleaning and maintenance
Cleaning and
maintenance
e n a n c e
a n d m a i n t
C l e a n i n g
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall condition
of the machine
Check spray arm for grease
and limescale deposits.
If you find such deposits:
Fill detergent dispenser with
detergent. Start the appliance without
utensils in the programme with
the highest rinsing temperature.
Clean the appliance with detergents/
appliance cleaners which
are particularly suitable for use with
dishwashers.
To ensure that the door seal always
remains clean and hygienic, regularly
clean it with a damp cloth and a little
washing-up liquid.
If the appliance is switched off for
a prolonged period, leave the door
ajar to prevent the formation of
an unpleasant odour.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not
liable for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water
and a little washing up liquid
.
are adequate. Do not use sponges with
a rough surface or abrasive detergents,
as these could scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths
or wash them out thoroughly several
times before using for the first time.
aus
21