Siemens iQ500 SN56M592AU/86 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Siemens iQ500 SN56M592AU/86. Siemens iQ500 SN56M592AU/86 36 stron.
Drukuj stronęDeactivating the button lock:
Hold down the button + for
approx. 4 sec. until the
display
When the programme ends
( :
on the digital display), the
button lock is cancelled. If there
is a power failure, the button
lock is retained. Whenever a
programme is restarted, the
button lock must be reactivated.
Damage
The appliance may be
repaired and opened up by a
technician only. To do this,
disconnect the appliance
from the power supply. Pull
out the mains plug or switch
off the fuse. Turn off the tap.
If the fascia is damaged
(cracks, holes, broken
buttons), do not operate the
appliance. Pull out the mains
plug or switch off the fuse.
Turn off the tap, call
customer service.
Disposal
1. Make redundant appliances
unusable to prevent
subsequent accidents.
2. Dispose of the appliance in a
n environmentally friendly
manner.
goes out.
Safety instructions
ã=
Warning
Risk of injury!
To prevent injuries, e.g.
caused by stumbling, open
the dishwasher only briefly
in order to load and unload
the dishwasher.
Knives and other utensils
with sharp points must be
placed with the points
downwards in the cutlery
basket* or horizontally on the
knife shelf* or in the cutlery
drawer*.
Do not lean or sit
on the open door.
In the case of free-standing
appliances, ensure that
the baskets are not
overloaded.
If the appliance
is not in a cavity and a side
panel is accessible, the door
hinge area must be covered
at the side
for reasons of safety
(risk of injury). The covers
are available as optional
accessories from customer
service or specialist outlets.
* depending on model
aus
7