Siemens iQ500 SX Series Instrukcja obsługi - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Siemens iQ500 SX Series. Siemens iQ500 SX Series 36 stron.

Drukuj stronę

aus

Fault, what to do?

Fault table

Fault

"Check water supply"

display 8 lights up.

Error code :

is lit.

Error code :

is lit.

Error code :

is lit.

Error code :

is lit.

Cause

Supply hose kinked.

Tap turned off.

Tap jammed or calcified.

Filter in the water supply blocked. Switch off the appliance and pull out

Filters 1R are soiled or

blocked.

Waste water hose

is blocked or kinked.

Siphon connection still sealed.

Cover on the waste water pump

loose.

Waste water pump blocked

or cover on the waste water

pump is not locked in position.

Mains voltage too low.

Remedial action

Install supply hose without kinks.

Turn on the tap.

Flow rate must be min. 10 l/min.

when water supply is open.

the mains plug. Turn off the tap. Unscrew

water connection.

Clean filter in the supply hose. Screw water

connection on again. Check for leaks.

Reconnect power supply. Switch on

the appliance.

Clean filters.

(See Cleaning and maintenance)

Install hose without kinks, remove any

residue.

Check connection to siphon and open if

required.

Lock cover correctly.

(See Waste water pump)

Clean pump and lock cover correctly. (See

Waste water pump)

Not an appliance fault, have the mains

voltage and electrical installation checked.