Cisco 7942 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco 7942. Cisco 7942 6 stron. Etherworks
Również dla Cisco 7942: Podręcznik użytkownika (6 strony), Podręcznik użytkownika (4 strony), Podręcznik użytkownika (6 strony), Podręcznik użytkownika (4 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (13 strony), Skrócona instrukcja obsługi (3 strony), Podręcznik szkoleniowy użytkownika (7 strony), Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (9 strony), Podręcznik użytkownika (2 strony), Podręcznik szkoleniowy użytkownika (2 strony), Podręcznik użytkownika (4 strony), Skrócona instrukcja obsługi (4 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (3 strony), Podręcznik (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Rozwiązywanie problemów i konserwacja (27 strony), Podręcznik użytkownika (2 strony)

Drukuj stronę
Cisco 7942 Podręcznik użytkownika
ANSWERING CALLS
1.
Lift handset, or press [Answer] softkey, [Speaker] button or [Headset] button.
2.
To answer a call when on another line, press the line of the incoming call, or press [Answer] softkey. The first call is
automatically put on hold.
3.
Conditions: If you have multiple lines (shared Extension numbers) on your phone, you will need to press the other line key(s)
to answer the ringing line (shared extension number). Other ringing lines on your set may alter your softkey features when
you are on a call. Press your active line key to be offered softkey features for the current call (your current call will not be
affected).
ENDING A CALL
1.
To hang up while using the handset, return the handset to its cradle. Or press [EndCall].
2.
To hang up while using the headset (non-wireless headsets), press the headset button. If you want to keep headset mode
activated (keep the button lit after hanging up), press [EndCall].
MUTING A CALL
1.
To activate mute, press the Mute
The Mute
button will mute the speech path of the headset, handset or speaker.
PLACING A CALL ON HOLD
When connected to a call, press the [Hold] softkey. (caller hears custom "music-on-hold")
1.
2.
To remove a call from hold on the current line, make sure that the appropriate call is highlighted and press [Resume] softkey.
3.
Remove a call from hold on a different line. Press a blinking line button (held line). If there is a single call holding on this
line, the call will resume automatically. If there are multiple calls holding, make sure that the appropriate call is highlighted
and press [Resume]. Note that a held call is indicated by the call-on-hold icon.
PARKING A CALL
1.
While on a call, press the more softkey until you see the [Park] softkey.
2.
Press the [Park] softkey. The display shows the number where the call is parked.
3.
To retrieve the parked call from any phone, lift handset and dial call park number where call is parked.
TRANSFERRING A CALL
During a call, press the [Transfer] softkey. This places the call on consultation hold. (caller hears custom "music-on-hold")
1.
2.
Dial the number you wish to transfer caller to. (Dial directory number or 9 + external telephone number)
3.
When ringing begins, press [Transfer] again, or wait for party to answer, announce the caller then press [Transfer]. If party
refuses call, press [EndCall], then [Resume] softkey, which returns you back to talk with original caller.
TRANSFERRING A CALL DIRECTLY TO VOICE MAIL
1.
During a call, press the [Transfer] softkey. This places the call on consultation hold.
2.
Dial the [* + extension number] you wish to transfer caller to.
3.
When Voice Mail answers, press [Transfer] softkey and/or hang up.
IMMEDIATE DIVERT (Send a call to your voice mailbox)
1.
When receiving an incoming call, press [iDivert].
2.
The [iDivert] feature automatically transfers a call (including ring or held call) to your voice mailbox. Caller will hear your
voice message greeting and can leave you a message.
MAKING A CONFERENCE CALL (6 parties max to a conference call)
1.
While on a call, press the [more] softkey, press the [Confrn] softkey. This will place the first call on hold and you will
receive dialtone.
2.
Place a call to another number.
3.
When the call connects, press [Confrn] again to add this party to the conference. When call initiator hangs up, no additional
parties can be added.
4.
To drop a party out of a conference, press [ConfList], highlight the name and press [Remove]. Only the initiator can remove
participants.
CALL PICKUP
To answer a call that is ringing on another extension within your call pickup group.
1.
Lift handset, press [PickUp] softkey.
button. (Off =
On =
) Press the Mute
button again to deactivate.
Pg. 4