Siemens SR24E202EU/06 Instrukcja obsługi - Strona 36

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Siemens SR24E202EU/06. Siemens SR24E202EU/06 38 stron.

Installation and connection

Removing the appliance

Also observe

the sequence of worksteps here.

1. Disconnect the appliance from

the power supply.

2. Turn off the water supply.

3. Undo the waste water and drinking

water connection.

4. Loosen fastening screws for

the furniture parts.

5. If fitted, remove the base panel.

6. Pull out the appliance, carefully

pulling the hose behind.

Empty the dishwasher and secure loose

parts.

Drain the appliance according to the

following steps:

1. Turn on the tap.

2. Close the door.

3. Switch on ON/OFF switch (.

4. Select programme with the highest

temperature.

5. Press START button @.

Programme sequence starts.

6. After approx. 4 minutes press the

START button @ until the Cleaning

display )* goes out.

After approx. 1 min. the End

display )"is lit.

7. Switch off ON/OFF switch (.

8. Turn off the tap, disconnect supply

hose and drain water.

Transport appliance upright only.

(This prevents residual water from

running into the machine control and

damaging the programme sequence.)

Protection against frost

If the appliance is in a room where there

is a risk of frost (e.g. holiday home),

empty the appliance completely (see

Transportation).

P r o t e c t i o n a g a i n s t f r o s t ( E m p t y i n g t h e a p p l i a n c e )