Siemens SX Series Instrukcja obsługi - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Siemens SX Series. Siemens SX Series 40 stron. Dishwasher
Również dla Siemens SX Series: Instrukcje obsługi (38 strony), Instrukcja obsługi (38 strony), Instrukcja obsługi (42 strony), Instrukcja obsługi (42 strony), Instrukcja obsługi (44 strony), Instrukcja obsługi (46 strony), Instrukcja obsługi (44 strony), Instrukcja obsługi (42 strony), Instrukcja obsługi (48 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (42 strony), Instrukcja obsługi (44 strony)

Drukuj stronę
Siemens SX Series Instrukcja obsługi
en
Fault, what to do?
Fault
Rust spots on the cutlery.
The appliance does not
start.
Programme starts
automatically.
Appliance cannot be set
(hardness, final rinse, ...).
The door is difficult
to open.
Door cannot be closed.
Cover on the detergent
dispenser cannot be
closed.
Detergent residue
in the detergent dispenser
or in the tablet collecting
tray.
32
Cause
Cutlery not adequately rust-
resistant. Knife blades are
frequently more severely
affected.
Cutlery will also rust if rusting
parts are rinsed at the same time
(pan handles, damaged utensil
baskets, etc.).
Salt content in the rinsing water
too high, as salt dispenser lock
not fastened firmly or salt was
spilled while being refilled.
The mains fuse has tripped.
Power cord not inserted.
The appliance door has not been
shut properly.
You did not wait until programme
ended.
Appliance is in the programme.
Appliance can be set at the start
of the programme only.
Child-proof lock is activated.
Door lock has been activated.
Door cannot be closed due to
installation.
Detergent dispenser or cover
guide blocked by sticky detergent
residue.
Spray arms blocked by utensils,
therefore detergent is not rinsed
out.
The detergent dispenser was
damp when filled.
Remedial action
Use corrosion-resistant cutlery.
Do not wash rusting parts.
Fasten salt dispenser lock firmly or remove
spilled salt.
Check mains fuse.
Ensure that the power cord is plugged all
the way into the back of the appliance and
into the socket. Check that the socket
functions.
Close the door.
Perform reset.
(See Terminating the programme).
Perform reset (see Terminating
the programme) and set the appliance
according to the instructions for use.
Deactivate childproof lock. (See instructions
for use at the back)
Close door with increased force.
Check appliance installation: Door or
attached parts must close without
obstruction.
Remove detergent residue.
Ensure that the spray arms can rotate freely.
Pour detergent into the dry detergent
dispenser only.