Siemens EA6..GF17. Instrukcja instalacji i użytkowania - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla Hob Siemens EA6..GF17.. Siemens EA6..GF17. 8 stron.

Drukuj stronę

Cleaning and care

The information in this section provides help on how best to

care for your hob.

Suitable maintenance and cleaning products can be purchased

from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills from

burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for glass ceramic.

Follow the cleaning instructions on the packaging.

Never use:

Undiluted washing-up liquid

■

Detergent intended for dishwashers

■

Scouring agents

■

Harsh cleaning agents such as oven spray or stain remover

■

After-sales service

Our after-sales service is there for you if your appliance should

need to be repaired. We are committed fo find the best solution

also in order to avoid an unnecessary call-out.

E number and FD number:

Please quote the E number (product number) and the FD

number (production number) of your appliance when

contacting the after-sales service. The rating plate bearing

these numbers can be found on the appliance certificate.

Please note that a visit from an after-sales service engineer is

not free of charge, even during the warranty period.

Installation instructions

The following must be noted

Electrical connection: To be carried out only by a licensed

expert. Incorrect connection will invalidate the warranty.

Installation: To be carried out only by a professional. The fitter

is liable for any damage.

Hob and cooker: must be the same brand, and have the same

combination feature.

Contact protection: must be ensured by the installation.

Installation instructions: cooker installation instructions must

be observed.

Work surface: Level, horizontal, stable.

Preparing the units

After the cutting out work is complete, remove the shavings.

Abrasive sponges

■

High-pressure cleaners or steam jet cleaners

■

Ground-in dirt can be best removed with a glass scraper,

available from retailers. Please note the manufacturer's

instructions.

You can also obtain a suitable glass scraper from our after-

sales service or from the e-Shop.

Using special sponges to clean glass ceramic achieves great

cleaning results.

Hob surround

To prevent damage to the hob surround, observe the following

instructions:

Use only hot soapy water.

■

Wash new sponge cloths thoroughly before use.

■

Do not use any sharp or abrasive agents.

■

Do not use the glass scraper.

■

Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

0844 8928999

Calls from a BT landline will be charged at up to

3 pence per minute. A call set-up fee of up to 6 pence

may apply.

01450 2655

Trust the expertise of the manufacturer, and rest assured that

the repair will be carried out by trained service technicians

using original spare parts for your domestic appliance.

PLQ

Fitting unit: Heat resistant to at least 90°C.

Cut-out: Minimum distance to the side walls: 70 mm.

Cut surfaces: Seal with heat-resistant material.

PLQ