Epson BrightLink 480i Instrukcja obsługi - Strona 42

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Epson BrightLink 480i. Epson BrightLink 480i 47 stron. Lamp and status information
Również dla Epson BrightLink 480i: Podręcznik Start Here (6 strony), Instrukcja połączenia (6 strony), Instrukcja instalacji (5 strony), Szablon montażowy (5 strony), Specyfikacje (6 strony), Deklaracja zgodności (4 strony), Podręcznik instalacji (3 strony), Podręcznik instalacji (2 strony), Podręcznik instalacji (5 strony), Podręcznik Start Here (6 strony)

An e-mail notifying the operator of a problem/warning/status is issued

Message

No signal

No image signals are being received by the

projector. Check the connection status and check

that the power for the connected equipment is

turned on.

Auto Iris Error

Stop using the projector, disconnect the power

cable from the electrical outlet, and contact Epson.

See your User's Guide for more information.

Network error (TCP

Check the following items.

connection error)

Check that the projector's power is turned on.

Check that the LAN cable is connected.

Check that Standby Mode is set to Communication

On (or Network On) or Network Monitoring is set to

On in the projector's configuration menu.

See your User's Guide for more information.

Network error

Check that the projector has been correctly

(ESC/VP.net

connected to the network. See your User's Guide for

communication error)

more information.

Network error

Check the projector's Monitor Password.

(Monitor Password

authentication error)

When the projector has 2 lamps, the additional information, such as (Lamp

1) or (Ballast 1), is displayed after the message so that you can know which

lamp has problems/warnings.

Messages to inform that the projector has recovered from the error or

warning statuses are sent.

Remedy