Siemens EC945RB90A Instrukcje użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Hob Siemens EC945RB90A. Siemens EC945RB90A 12 stron. Maintenance instructions
Drukuj stronęUser Instructions
User Instructions
Boiling burners
Use "High flame" setting to bring the pan to the boil, then
adjust the flame between "High flame" and "Low flame"
to maintain the required pan temperature.
Important:
The use of a cooktop leads to the production of heat and
moisture in the kitchen .For this reason make sure that
the room is properly ventilated.Keep natural ventilation
openings,
mechanical ventilation device(e.g. a range
overhead exhaust fan). An orangy flame is normal and
simply indicates the presence of salt in the atmosphere
(from cooking). If the flame has yellow patches, this is
not a fault (of any kind).
For safety and economic gas usage you should always
For safety and economic gas usage you should always
use the correct pan on the correct burner.Flames should
use the correct pan on the correct burner.Flames should
not protrude beyond the base of the pan. You will save
not protrude beyond the base of the pan. You will save
energy, time and money by always placing the correct
energy, time and money by always placing the correct
pan size on the correct gas ring. See fig.
pan size on the correct gas ring. See fig. 15.
14
The chart below gives the correct pan usage for each burner
The chart below gives the correct pan usage for each burner
Burner
Small burner
Medium
burner
Large burner
Wok burners
Big wok burners
Wok trivet
Depending on the model, the hotplate is supplied with
an extra wok trivet. This trivet must be used when using
the wok burner for receptacles with diameters of more
than 26 cm diameter, griddle plates and all kinds of
concave receptacles such as woks, etc.
The manufacturer cannot be held responsible for the
non-use or misuse of this additional pan support.
Coffee support
Depending on the model, the hotplate is supplied with
an extra coffee support. This support is for use only
with the small burner when supporting receptacles
with a diameter of less than 10 cm.
The manufacturer cannot be held responsible for the
non-use or misuse of these additional pan supports.
15
such as windows, open or provide a
hood or
hood or
Recomended
Minimum
pan diameter
pan diameter
120-140 mm.
120 mm.
140-200 mm.
140 mm.
220-260 mm.
220 mm.
_
>
220 mm.
>
_
220 mm.
14
.
3
3
3. Place the hotplate on top of the bench cut-out and
press down firmly on all edges at the same time to ensure
that the hob is resting on its entire perimeter.
4 .Once the hob is fitted you should turn the clips and
tighten the screw as shown in Fig. 4.
4
8