Epson BrightLink 485Wi Instrukcja połączenia - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Projektor Epson BrightLink 485Wi. Epson BrightLink 485Wi 6 stron. Lamp and status information
Również dla Epson BrightLink 485Wi: Podręcznik Start Here (6 strony), Instrukcja obsługi (47 strony), Instrukcja instalacji (5 strony), Szablon montażowy (5 strony), Specyfikacje (6 strony), Deklaracja zgodności (4 strony), Specyfikacje (6 strony), Podręcznik instalacji (3 strony), Podręcznik instalacji (2 strony), Podręcznik instalacji (5 strony), Podręcznik (21 strony), Podręcznik Start Here (6 strony)

If you connect VGA cables to both the

label the cables. The teacher or other user needs to know which port is being used so that the

correct source for full interactivity can be selected in the Easy Interactive Function menu

screen.

For full computer interactivity and dual pen support (using Easy Interactive Tools or other

dual-pen application), you also need to connect a USB cable from the computer to the

projector.

Selecting the Source for Interactivity

Selecting the source for Computer Interactive enables Easy Interactive Tools to be used on the

"main computer" connected to the projector.

Computers or other devices connected to other sources (and not selected) can use the built-in

(embedded) interactive toolbar.

1. Press the

button, select the

2. Select the

Easy Interactive Function setting

3. Select

Use Source

4. Select the source where the computer is connected. For example, if you connected the

computer to the projector's

A computer connected to the selected source (and also connected to the projector with a

USB cable) will work with Easy Interactive Tools and have dual-pen support.

Computer1

Extended

and press

Enter

port, select

Computer1

port, select

HDMI

and

ports, make sure you

Computer2

menu, and press

Enter

and press Enter.

. If you connected the

Computer 1

HDMI