Siemens ED8 FW Series Instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Siemens ED8 FW Series. Siemens ED8 FW Series 28 stron.
Również dla Siemens ED8 FW Series: Instrukcja obsługi (16 strony)
Drukuj stronę
Childproof lock
en
AChildproof lock
Y ou can use the childproof lock to prevent children
C h i l d p r o o f l o c k
from switching on the hob.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
seconds. The indicator next to the symbol
for 10 seconds. The hob is locked.
To deactivate: press the symbol
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
16
‚
for approximately 4
lights up
‚
for approximately
‚
kWipe protection
I f you wipe over the control panel while the hob is
W i p e p r o t e c t i o n
switched on, settings may be altered. To avoid doing
this, you can use the hob's "Lock control panel for
cleaning" function.
To activate: Touch the
Ñ
sounds. The control panel is locked for 35 seconds.
You can now wipe over the surface of the control panel
without altering any settings.
To deactivate: The control panel will be unlocked once
35 seconds have elapsed. To release the function early,
touch the
symbol.
Ñ
Notes
An audible signal sounds 30 seconds after
■
activation. This indicates that the function is about to
finish.
The cleaning lock does not lock the main switch. The
■
hob can be switched off at any time.
bAutomatic safety cut-out
I f a hotplate operates for an extended period and no
A u t o m a t i c s a f e t y c u t - o u t
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
indicator
or
flash alternately in the hotplate display.
œ
•
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).
symbol. An audible signal
,
and the residual heat
"
‰