Siemens ED811BS16E Informacje dotyczące użytkowania - Strona 6

Przeglądaj online lub pobierz pdf Informacje dotyczące użytkowania dla Hob Siemens ED811BS16E. Siemens ED811BS16E 24 stron. Induction hob with integrated ventilation system

Drukuj stronę

en Suitable cookware

4 Suitable cookware

Cookware that is suitable for induction cooking must

have a ferromagnetic base, i.e. it must be attracted by

a magnet. The base must also match the size of the

Cookware

Recommended cook-

ware

Suitable

Not suitable

Notes

¡ Do not use adapter plates between the hob and the

cookware.

¡ Do not heat up empty cookware and do not use

cookware with a thin base, as this may become very

hot.

Materials

Stainless steel cookware in a sandwich

design that distributes the heat well.

Ferromagnetic cookware made of enamelled

steel, cast iron or special induction cookware

made of stainless steel.

The base is not fully ferromagnetic.

Cookware bases with aluminium content.

Cookware made from normal thin steel,

glass, clay, copper or aluminium.

cooking zone. If cookware is not detected on a cooking

zone, place this on the cooking zone with the next

smallest diameter.

4.1 Size and characteristics of the cookware

To correctly detect the cookware, take the size and the

material of the cookware into consideration. All cook-

ware bases must be perfectly flat and smooth.

You can use Cookware test to check whether your

cookware is suitable. You can find more information

about this under

→ "Cookware test", Page 14.

Properties

This cookware distributes the heat evenly,

heats up quickly, and ensures that it can be

detected easily.

This cookware heats up quickly and ensures

that it can be detected easily.

If the ferromagnetic area is smaller than the

base of the cookware, only the area that is

ferromagnetic heats up. As a result, the heat

is not distributed evenly.

These reduce the ferromagnetic area, which

means that less power is emitted to the

cookware. This cookware may not be suffi-

ciently detected or may not be detected at

all, and therefore does not heat sufficiently.