Siemens EH BE Series Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Siemens EH BE Series. Siemens EH BE Series 24 stron.
Również dla Siemens EH BE Series: Informacje dotyczące użytkowania (16 strony)

Drukuj stronę

PowerBoost function

vPowerBoost function

T he PowerBoost function enables you to heat up large

P o w e r B o o s t f u n c t i o n

quantities of water faster than when using heat setting

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration). Otherwise,

the display for the selected hotplate; the

will then be set automatically without activating the

function.

Activation

Select a hotplate.

Touch the

symbol.

lights up on the display.

›

The function is activated.

Deactivation

Select the hotplate.

Touch the

symbol.

The

display goes out and the hotplate switches

›

back to the

heat setting.

The function is deactivated.

In certain circumstances, the PowerBoost

Note:

function can switch itself off automatically in order to

protect the electronic elements inside the hob.

and

will flash in

›

heat setting

AChildproof lock

Y ou can use the childproof lock to prevent children

C h i l d p r o o f l o c k

from switching on the hob.

Activating and deactivating the childproof

lock

The hob should be turned off.

To activate: press the symbol

seconds. The indicator next to the symbol

for 10 seconds. The hob is locked.

To deactivate: press the symbol

4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically

activates when a hob is switched off.

Switching on and off

You can find out how to switch the automatic childproof

lock on in the ~ "Basic settings" section

bAutomatic safety cut-out

I f a hotplate operates for an extended period and no

A u t o m a t i c s a f e t y c u t - o u t

settings are changed, the automatic safety shut-off is

activated.

The hotplate stops heating.

indicator

•

flash alternately in the hotplate display.

When you touch any symbol, the display switches off.

The hotplate can now be set again.

The point at which the safety shut-off becomes active

depends on which heat setting has been set (after 1 to

10 hours).

‚

for approximately 4

lights up

‚

for approximately

‚

and the residual heat

‰