Epson BrightLink 685Wi Instrukcja konfiguracji - Strona 18
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Projektor Epson BrightLink 685Wi. Epson BrightLink 685Wi 43 stron.
Również dla Epson BrightLink 685Wi: Podręcznik Start Here (6 strony)
Drukuj stronęMatching Images for Multiple Projectors
You can adjust the projectors' images to minimize any differences in brightness or color. Use these
sections to adjust the image settings for each projector.
Before adjusting the images, make sure you have used the Geometry Correction settings to align the
projected images, and that both projectors are in the same Color Mode. In most cases, use the
Presentation color mode for DuoLink installations.
To change the Color Mode setting, press the Menu button and select the Extended > Multi-Projection
> Color Mode setting.
Adjusting Color Uniformity
Adjusting the Projector's Brightness Level
Matching the Image Colors
Adjusting RGBCMY
Parent topic:
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each
projector. (The color tone may not be uniform even after performing color uniformity.)
Note: If you cannot adjust color uniformity, make sure the Color Mode setting is not set to Dynamic.
1. Press the Menu button on the remote or control panel, select the Extended menu, and press Enter.
Configuring Projector Settings for Multiple Projectors
18