Epson BrightLink Pro 1430Wi Instrukcja instalacji - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Projektor Epson BrightLink Pro 1430Wi. Epson BrightLink Pro 1430Wi 26 stron. Control pad and touch unit
Również dla Epson BrightLink Pro 1430Wi: Rozpocznij (6 strony)
Drukuj stronę6. Attach the two markers you removed from the Touch Unit to the marker positions shown on the
projected screen (
Match the positions so that the crosses (
(
) (
). Move the marker over the projected cross until the lines of the cross align with the lines
on the marker.
When pointers (
) (
displayed on the left and right of the projection screen, attach the markers to the projection screen as
follows:
•
For magnetic screens: Place the bottom of the markers onto the screen.
•
For non-magnetic screens: Use the supplied tape to secure the markers. Attach the tape so that each
end of the marker is secure on the screen.
) (
).
Blue marker
position
) overlap with the points (
) with the same color (blue and green) as the marker positions are
Correct position
Green marker
position
) on the marker positions
Incorrect position