Epson ChromaBlast 1.0 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Epson ChromaBlast 1.0. Epson ChromaBlast 1.0 13 stron. For epson stylus pro 4880
Również dla Epson ChromaBlast 1.0: Podręcznik dla początkujących (47 strony)
EPSON PowerLite Home 10 Projector
4. Click
Mirror Displays
One of the monitor icons automatically moves on top of
the other.
Click here
If you're using Mac OS 9.x or earlier:
1. From the Apple menu, select
.
Monitors and Sound
2. Click the
icon, and then drag one monitor icon on
Arrange
top of the other.
Click here
Drag one monitor
icon on top of
the other
Note: If the
option isn't available, you may need to select
Arrange
one of the Simulscan resolution settings. Click the
and then select a Simulscan resolution from the Resolution box.
(Allow a few seconds for the projector to sync up.)
Using the Remote Control
The remote control uses a line-of-sight infrared signal. It lets
you access the projector's features from anywhere in the room—
up to 20 feet away. (This distance may be shorter if the remote
control batteries are low.) The projector may not respond to
remote control commands in these conditions:
❏ You're too far away—not within 20 feet (6 meters)—or not
within 30° to the left or right or 15° above or below the front
or rear infrared receiver
8 - EPSON PowerLite Home 10 Projector
in the lower corner of the screen.
, then click
Control Panels
Monitor
❏ The battery is weak or not installed correctly
❏ Ambient light is too bright, or fluorescent light is shining
into the infrared receiver
❏ Other equipment emitting infrared energy is present (such as
a radiant room heater)
Switch between
different video sources
Changes the
picture's
aspect ratio
Navigate menus
and select menu
items; adjust
volume
Displays or hides
projector's menus
Turns off audio
and video
Freezes the picture
and sound
Using the Menus
The on-screen menus let you adjust and customize the projector
features from the remote control:
❏
controls the look and quality of the projected image
Image
icon
(from a computer or video source).
❏
lets you set the child lock or sleep mode, adjust the
Setting
position and size of the picture, select front or rear
projection, and customize other projector features.
❏
provides information about the current projector and
Info
lamp settings.
❏
lets you reset the lamp timer and the projector's
Reset
memory, or return all the menu settings to their factory
defaults.
7/03
Turns projector on
and off
Cycles through
4 pre-set color
modes
Recalls
settings made
in projector's
menus
Exits the
current menu
or function
Optimizes
images from a
computer