Epson ChromaBlast 1.0 Podręcznik dla początkujących - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Projektor Epson ChromaBlast 1.0. Epson ChromaBlast 1.0 47 stron. For epson stylus pro 4880
Również dla Epson ChromaBlast 1.0: Instrukcja obsługi (13 strony)

Drukuj stronę

Sawgrass Technologies, Inc.

ChromaBlast

Getting Started Guide for the EPSON Stylus Pro 4880

™

1. Ensure the printer power is on. Press the ink compartment cover to

release the latch and open the cover.

2. Raise the ink lever to the unlocked position.

The ink lever is located to the right of each ink

compartment. If you are installing a complete

set of ink cartridges, then install using the

following order starting from left to right:

Black (CB), Cyan (CB), Magenta (CB),

Yellow (CB), Black (CB), Cyan (CB),

Magenta (CB) and Yellow (CB).

Note: The cartridge label should be facing left as the cartridge is inserted

into it's slot.

Continue to step 5 below.

If you are just replacing an empty cartridge, then continue to step 3 and 4

below.

3. Remove the empty ink cartridge from the

printer.