Cisco 7962G - Unified IP Phone VoIP Podręcznik administracyjny - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik administracyjny dla Telefon IP Cisco 7962G - Unified IP Phone VoIP. Cisco 7962G - Unified IP Phone VoIP 12 stron. Unified communications manager 9.0 (sccp and sip)
Również dla Cisco 7962G - Unified IP Phone VoIP: Podręcznik użytkownika (23 strony), Arkusz danych (5 strony), Podręcznik użytkownika (6 strony), Podręcznik użytkownika (4 strony), Specyfikacje (5 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (12 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (6 strony), Podręcznik administracyjny (16 strony), Rozwiązywanie problemów i konserwacja (27 strony)

Cisco Unified Communications Manager Administration Phone Addition

You can add phones individually to the Cisco Unified Communications Manager database by using

Cisco Unified Communications Manager Administration. To do so, you first need to obtain the MAC address

for each phone.

After you have collected MAC addresses, in Cisco Unified Communications Manager Administration, choose

Device > Phone and click Add New to begin.

For complete instructions and conceptual information about Cisco Unified Communications Manager, see

Cisco Unified Communications Manager Administration Guide and Cisco Unified Communications Manager

System Guide.

Cisco Unified Communications Manager Bulk Administration Tool (BAT), a standard Cisco Unified

Communications Manager application, enables you to perform batch operations, including registration, on

multiple phones.

To add phones using BAT only (not in conjunction with TAPS), you first need to obtain the appropriate MAC

address for each phone.

To add a phone to the Cisco Unified Communications Manager, follow these steps:

Procedure

Step 1

From Cisco Unified Communications Manager, choose Bulk Administration > Phones > Phone Template.

Step 2

Click Add New.

Step 3

Choose a Phone Type and click Next.

Step 4

Enter the details of phone specific parameters such as Device Pool, Phone Button Template, Device Security

Profile.

Step 5

Click Save.

Step 6

From Cisco Unified Communications Manager, choose Device > Phone > Add New to add a phone using

an already created BAT phone template.

For more information on BAT, see Cisco Unified Communications Manager Bulk Administration Guide. For

more information on creating BAT Phone Templates, see Cisco Unified Communications Manager Bulk

Administration Guide, "Phone Template" chapter.