Cisco 8800 Series Podręcznik - Strona 29

Przeglądaj online lub pobierz pdf Podręcznik dla Telefon IP Cisco 8800 Series. Cisco 8800 Series 48 stron. Hosted enterprise uc ip phone
Również dla Cisco 8800 Series: Instrukcja instalacji sprzętu (25 strony), Podręcznik użytkownika (4 strony), Szybki start (2 strony), Podręcznik (10 strony), Skrócona instrukcja obsługi (3 strony), Skrócona instrukcja obsługi (2 strony), Instrukcja obsługi (2 strony), Podręcznik użytkownika (24 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (28 strony), Skrócona instrukcja obsługi (3 strony), Główna instrukcja migracji oprogramowania sprzętowego (31 strony), Podręcznik użytkownika (2 strony), Podręcznik użytkownika (30 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (44 strony), Podręcznik (13 strony), Podręcznik (14 strony), Podręcznik (4 strony), Podręcznik (4 strony), Rozpocznij (6 strony), Skrócona instrukcja obsługi (19 strony), Podręcznik konserwacji (6 strony), Szybki start (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika końcowego (6 strony), Skrócona instrukcja obsługi (2 strony), Rozwiązywanie problemów (4 strony), Skrócona instrukcja obsługi (7 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (22 strony), Podręcznik (22 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (40 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)

Cisco 8800 Series Podręcznik
Cisco IP Phone Accessories
Where:
sd= speed dial
cp= call pickup
You can also enable busy lamp field only with call pickup or speed dial. Enter the string in the following
format:
fnc=blf+cp;sub=xxxx@$PROXY;usr=yyyy@$PROXY
fnc=blf+sd;sub=xxxx@$PROXY;usr=yyyy@$PROXY
You can also configure the parameter in the configuration file (cfg.xml) by entering a string in the following
format:
<Unit_1_Key_2_ ua="na">fnc=blf;ext=3252@$PROXY;nme=BLF_3252</Unit_1_Key_2_>
Step 5
Click Submit All Changes.
Enable the User to Configure Features on Key Expansion Module Line Keys
You can enable the user to configure features on the line keys of the key expansion module. The user can then
add any of the configured features to the dedicated line keys. For the supported features, see
Features on Line
Before you begin
• Access the phone administration web page. See
• Ensure that the line keys of the key expansion module are not in the Inert mode.
Procedure
Step 1
Select Voice > Att Console.
Step 2
In the General section, configure the Customizable PLK Options parameter with the codes of your desired
features defined in
Example: You configure this parameter with
a long-press on a key expansion module line key. The feature list looks like:
1 None
2 BLF presence
4 Menu shortcut
3 Do not disturb
The user can then select a feature or a menu shortcut to add to the line key.
You can also configure this parameter in the configuration file (cfg.xml) with a string in this format:
<Customizable_PLK_Options ua="na">blf;shortcut;dnd;</Customizable_PLK_Options>
Enable the User to Configure Features on Key Expansion Module Line Keys
Keys.
Configurable Features on Line
Access the Phone Web
Keys.
. The user can call up the feature list with
blf;shortcut;dnd;
Cisco IP Phone Accessories
Configurable
Interface.
29