Cisco 8821 Konfiguracja - Strona 4

Przeglądaj online lub pobierz pdf Konfiguracja dla Telefon IP Cisco 8821. Cisco 8821 16 stron. Wireless ip phone
Również dla Cisco 8821: Instrukcja obsługi akcesoriów (30 strony), Rozwiązywanie problemów (5 strony), Podręcznik użytkownika końcowego (6 strony), Skrócona instrukcja obsługi (2 strony)

Install the Cisco Wireless IP Phone 8821 Battery

Caution

b) Slide the bottom of the battery under the tabs in the bottom of the battery compartment.

c) Press the battery into the battery compartment until it locks in place. Make sure that it is flat in the

compartment.

The following graphic shows a properly-installed battery.

Step 3

Inspect the gasket on the inside of the battery compartment cover and, if necessary, clean it with a cloth

dampened with water.

Caution

Step 4

Replace the cover to the battery compartment.

Phone Setup

Do not force the battery into the compartment or you will damage the compartment and the

battery.

Do not use oil- or alcohol-based cleaners on the gasket. These cleaners will damage the gasket and

void the phone warranty.

Phone Setup