Cisco 8851 Podręcznik - Strona 14

Change the Service Mode

• Print the email with the QR code and hold the paper in front of the phone camera.

• Display the QR code on your mobile device and hold the device in front of the phone camera.

• Display the QR code on your computer and hold the phone in front of the computer screen.

Step 2

Turn the ring around the camera clockwise to open the shutter.

Step 3

Scan the QR code.

When the scan succeeds, your phone registers with the server, and you're ready to make your first call.

Change the Service Mode

When your phone connects to the existing server, you hear a beep tone that exists for 5 seconds. You also

view an alert message window which indicates that you can change the service mode to Huron.

Procedure

Step 1

To change the service mode:

• Press the Select key on the phone.

• Select Settings > Admin Settings > Reset Settings > Service Mode.

Your phone deactivates your VPN, and then restarts.

Step 2

Press Reset to change the service to Huron.

Step 3

Press Cancel to retain the existing service.

Secure the Phone with a Cable Lock

You can secure your Cisco IP Phone 8800 Series with a laptop cable lock up to 20 mm wide.

Procedure

Step 1

Take the looped end of the cable lock and wrap it around the object to which you want to secure your phone.

Step 2

Pass the lock through the looped end of the cable.

Step 3

Unlock the cable lock.

Step 4

Press and hold the locking button to align the locking teeth.

Step 5

Insert the cable lock into the lock slot of your phone and release the locking button.

Step 6

Lock the cable lock.

Replace Your Existing Phone with a New Phone

You can change your phone model. The change can be required for a number of reasons, for example:

Your Phone