Epson EB-475W Instrukcja instalacji - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Projektor Epson EB-475W. Epson EB-475W 37 stron. Ultra-short-throw projectors
Również dla Epson EB-475W: Specyfikacje (6 strony), Arkusz danych (2 strony)

Drukuj stronę
Epson EB-475W Instrukcja instalacji
h

Secure the projector to the setting plate

(1) Loosen the two screws and remove the cable cover from the projector.
(2) Insert the slide plate into the setting plate from the interface side of the projector (
Align the 3-axis adjustment unit with the slide plate's standard position (
(3) Tighten the M4 x 12 mm hexagon socket head cap bolts (x2) (
Slide plate
Projector
interface side
M4 x 12 mm hexagon socket head cap bolts
Warning
If you use adhesives to prevent the screws from loosening or things such as lubricants or oils
on the slide plate fixing part of the projector, the case may crack and cause the projector to fall,
resulting in personal injury or property damage. Do not use adhesives, lubricants, or oils to
install or adjust the setting plate.
Screws (x2)
Washer
Spring washer
Cable cover
Bolt positions
Standard position
26
).
).
).