Cisco Cisco 7960 Podręcznik użytkownika - Strona 13

Conference Call Tips

When the conference call initiator disconnects, the conference call is terminated (if the

cdnf_join_enable parameter is set to disabled).

• To place a conference call on hold, press the Hold softkey. The other parties can not talk

among themselves. To avoid disrupting the other callers, consider muting the call instead. To

mute the call, press the MUTE button.

• To place a conference call on speakerphone, press the SPEAKER button. Press the MUTE

button to mute the speakerphone. The conference parties cannot hear you but you can hear

them.

• The Cisco IP Phone 7940/7960 only allows three parties in a conference call.

• Call waiting calls cannot be conferenced in, the conferencing node must establish both legs of

the 3-Way conference.

Using Voice Mail

Voice mail allows you to access messages left by callers when you are unavailable to take their

call. Voice mail is an optional feature configured by your system administrator. Your particular

phone setup might not support accessing voice mail in this way.

These sections describe how to use voice mail with the Cisco IP Phone 7940/7960:

• Setting Up Voice Mail, page 13

• Accessing Voice Mail, page 14

Setting Up Voice Mail

To set up voice mail, press the messages button and follow the voice instructions.

Refer to the documentation for your voice mail system for information about setting it up.

Hostcomm Hosted Telephony

Using the Cisco IP Phone 7940/7960

User Guide