Cisco Cisco Access Registrar 4.2 Konfigurowanie ustawień sieciowych - Strona 16
Przeglądaj online lub pobierz pdf Konfigurowanie ustawień sieciowych dla Telefon IP Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 stron. Telepresence conference system
Również dla Cisco Cisco Access Registrar 4.2: Podręcznik użytkownika (44 strony), Podręcznik dla początkujących (46 strony)
Drukuj stronę
Modifying DHCP Settings
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Releasing a DHCP Address
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-16
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to DHCP Enabled.
If DHCP is enabled, the option appears as
DHCP Enabled YES
Press the No softkey to disable DHCP.
Press Save.
Related Topics
Enabling DHCP, page 4-13
•
Releasing a DHCP Address, page 4-16
•
Configuring IP Settings, page 4-17
•
When moving the phone to a new network segment, you should first release the
DHCP address. You cannot perform this procedure from the Phone Configuration
web page. Instead, you must use the Network Configuration Screen (for the
Cisco Unified IP Phone 7905G and 7912G).
To release the DHCP address for the Cisco Unified IP Phone, follow these steps:
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
OL-8617-01