Cisco SPA-500 Series Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon IP Cisco SPA-500 Series. Cisco SPA-500 Series 8 stron. Ip phone with unified communications uc320w
Również dla Cisco SPA-500 Series: Podręcznik użytkownika (9 strony), Podręcznik użytkownika (10 strony), Podręcznik użytkownika (12 strony), Skrócona karta informacyjna (2 strony), Skrócona karta informacyjna (2 strony), Skrócona instrukcja obsługi (4 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (3 strony), Skrócona instrukcja obsługi (3 strony), Instrukcja obsługi (3 strony), Podręcznik (2 strony), Podręcznik (2 strony), Korzystanie z (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę
Cisco SPA-500 Series Podręcznik użytkownika
NOTE:
•
If the party you are trying to connect does not answer,
end Call
End
press the
(or
resume
(or Resume) softkey, (or press the blinking line
key) to connect with previous caller/s.
Page
1. With the handset on-hook, press the
2. Dial the desired extension and press #.
3. After a brief tone, the call connects to the desired
extension and activates its speaker phone. You can
then begin speaking to the other party.

Group Page

1. Dial 800.
2. All idle phones in group will be alerted with a paging
beep (may not be available at all locations).
3. After a brief tone, begin speaking and hang up when
finished.

Directory

You can search for other people in your group through a
directory.
1. Press the
right navigation button
softkey.
2. Navigate (using up/down navigation buttons) to option
3- Group
2-
Group) and press
(or
3
simply press
on the keypad).
3. Select option
1- Simple
first or last name of the person you wish to reach.
4. Use the up/down navigation buttons to find and select
the desired person/number, then press the

Call History

1. Press the
setup
button.
2. Select option
3- Call History
3. Select option
1- Redial
3- Missed Calls
(or
1- All
Received Calls
or
4- Placed
4. Use up/down navigation button to select the desired
number and then press
TelNet Worldwide, Inc. • telnetww.com • (800) 508-1254
Cisco SPA500 Series
User Guide
Call) softkey, followed by the
page
softkey.
and then the
dir
select
softkey (or
Search. You can now enter the
dial
softkey.
(or
2 - Call
History)
List,
2- Answered
Calls, or
Calls,
2- Missed
Calls,
3-
Calls)
Dial
softkey to place the call.
Important Note About 911:
Because VoIP (Voice over Internet Protocol) service
works differently than traditional phone service, VoIP
E911 service may also work differently. To understand
limitations and to be prepared should you need to make
a 911 call from your IP phone, please read the TelNet
E911 Emergency Service Advisory Notification at:
www.telnetww.com/TelNet911Advisory.pdf
Cisco-SPA500-series-220126-UG
Page 4